ASPI-0630LR-100M-T15
10 uH shielded buck inductor — Abracon — C1334133 — board-b L1 (fitted) — rec-aspi-0630lr-100m-t15
Generated from the component evidence records — edit the records, not this page.
Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.
This record in the catalog: ASPI-0630LR-100M-T15
Identity
| Field | Recorded value |
|---|---|
| Record ID | rec-aspi-0630lr-100m-t15 |
| Record kind | standalone |
| Manufacturer part number | ASPI-0630LR-100M-T15 |
| Manufacturer | Abracon |
| Function | 10 uH shielded buck inductor |
| LCSC ID | C1334133 |
| Package | ASPI-0630LR_L7.5-W6.85 |
| Inventory line | line-c1334133 |
Fit: Fitted
Identity state: VERIFIED
Source state: AVAILABLE
Coverage: 2 open of 4 published
Documents and package
Datasheet PDF
Footprint preview
ASPI-0630LR_L7.5-W6.85. Open SVGPackage model
Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Datasheet PDF — ASPI-0630LR molded power inductor
Selected source ID: src-aspi-0630lr-100m-t15-datasheet
Authority: MANUFACTURER_PRIMARY
Availability: AVAILABLE
Package footprint: ASPI-0630LR_L7.5-W6.85
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Placements
Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.
| Board | Reference designator |
|---|---|
| board-b | L1 |
Coverage
Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.
exact orderable identity
Coverage ID: cov-aspi-0630lr-100m-t15-identity · Status: COVERED
Reason: Exact MPN/LCSC binding retained.
Facts in this domain:
loaded operation and physical validation
Coverage ID: cov-aspi-0630lr-100m-t15-application · Status: OPEN
Reason: The final assembled circuit needs loaded thermal, transient and physical validation; stated typical or mirror-only evidence is not a guaranteed application result.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
maximum-envelope visualization provenance
Coverage ID: cov-aspi-0630lr-100m-t15-visualization · Status: COVERED
Reason: Primary dimensional maxima and explicit project-only model provenance are retained; this coverage does not establish exact physical geometry.
Facts in this domain:
exact manufacturer 3D model availability
Coverage ID: cov-aspi-0630lr-100m-t15-exact-model · Status: OPEN
Reason: Official STEP link exists, but binary retrieval returned403; a conservative maximum envelope is supplied for visibility without claiming exact manufacturer geometry.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
Facts
Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.
GUARANTEED_ELECTRICAL
A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
Fact: fact-aspi-0630lr-100m-t15-inductance
Value: 10 · Unit: uH
Conditions: 100 kHz 1 V nominal
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Page 1 ASPI-0630LR-100 row
Fact: fact-aspi-0630lr-100m-t15-tolerance
Value: 0.2 · Unit: ratio
Conditions: M tolerance code
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Page 1 row
Fact: fact-aspi-0630lr-100m-t15-dcr-max
Value: 0.068 · Unit: ohm
Conditions: Maximum at tabulated test conditions
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Document section: Page 1 DCR max
TYPICAL_CURVE
A representative figure read from a characteristic curve. Typical values are not guaranteed and vary part to part.
Fact: fact-aspi-0630lr-100m-t15-isat
Value: 5.5 · Unit: A
Conditions: Typical current causing 30% inductance loss; not a guaranteed minimum
Verdict: NEEDS BENCH · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Document section: Page 1 Isat typical and definition
THERMAL_SOA
Thermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions.
Fact: fact-aspi-0630lr-100m-t15-irms
Value: 4 · Unit: A
Conditions: Typical current producing 40 C rise; includes self-heating in 125 C operating limit
Verdict: NEEDS BENCH · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Document section: Page 1 Irms typical and definition
PROJECT_STATE
A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
Fact: fact-aspi-0630lr-100m-t15-identity
Value: lcsc=C1334133; manufacturer=Abracon; mpn=ASPI-0630LR-100M-T15; variant=ASPI-0630LR_L7.5-W6.85 · Unit: NONE
Conditions: exact orderable identity
Verdict: CONFIRMED - distributor identity only · Provenance: DISTRIBUTOR-IDENTITY
Evidence: src-aspi-0630lr-100m-t15-catalog — Product identity table
Fact: fact-aspi-0630lr-100m-t15-manufacturer
Value: Abracon · Unit: NONE
Conditions: Exact orderable manufacturer
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Document section: Document title
Fact: fact-aspi-0630lr-100m-t15-land-pattern
Value: pads 2.35 x 3.5 mm, centers +/-3.025 mm; outer span 8.4 mm and gap 3.7 mm · Unit: NONE
Conditions: Hand-authored exact Rev C recommended land pattern; EasyEDA part unavailable
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Document section: Page 7 recommended land pattern
Fact: fact-aspi-0630lr-100m-t15-pins
Value: two nonpolar terminals; project assigns terminal 1 to SW and 2 to PRE · Unit: NONE
Conditions: Project orientation for a nonpolar winding
Verdict: NOT APPLICABLE · Provenance: PROJECT-CHOICE
Evidence: src-aspi-0630lr-100m-t15-project — Document section: Board B L1 placement
Fact: fact-aspi-0630lr-100m-t15-package-dimensions
Value: maximum_height_mm=3; maximum_length_mm=7.5; maximum_width_mm=6.85; nominal_height_mm=2.8; nominal_length_mm=7.1; nominal_width_mm=6.6 · Unit: NONE
Conditions: Rev C A=7.1±0.4,B=6.6±0.25,C=2.8±0.2 mm; current manufacturer PDF hash matches the retained source. The maximum envelope includes the full published extents, not exact molded/terminal shape.
Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC
Evidence: src-aspi-0630lr-100m-t15-datasheet — Page7 Mechanical Specifications figure and A/B/C dimension table
Fact: fact-aspi-0630lr-100m-t15-exact-model-unavailable
Value: Official family STEP is published but its binary could not be retrieved in this session · Unit: NONE
Conditions: Official-host HTTPS requests returned403 on2026-09-20; this is a dated retrieval failure, not a claim that no manufacturer CAD exists.
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-aspi-0630lr-100m-t15-manufacturer-step-attempt — Manufacturer product-page document links section, STEP row, and direct HTTP retrieval attempts
Fact: fact-aspi-0630lr-100m-t15-visualization-envelope
Value: Project-generated conservative maximum envelope; not exact manufacturer CAD · Unit: NONE
Conditions: Simple7.5x6.85x3.0 mm box centered inXY with bottomZ=0. Physical terminals, fillets, markings and internal construction are intentionally unspecified. Use the existing primary land pattern for assembly; the visualization does not certify clearance, fit or thermal behavior.
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-aspi-0630lr-100m-t15-model-generator — Generation section: SIZE_MM, WRL mesh and STEP readback dimensions
Pin maps
The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.
pinmap-aspi-0630lr-100m-t15
Symbol:
ASPI-0630LR-100M-T15Footprint:
ASPI-0630LR_L7.5-W6.85Pins: 2
Pin assignments
| Symbol pin | Name | Footprint pad | Function |
|---|---|---|---|
1 | 1 | 1 | switch node terminal |
2 | 2 | 2 | output terminal; winding nonpolar |
Interactions
Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.
int-aspi-0630lr-100m-t15-u2
Records involved:
rec-aspi-0630lr-100m-t15(this record)Conditions: U2 13.44 V nominal pre-regulator at 1.2 A synth rail budget; low-line, startup, temperature and capacitance assumptions require final integration review.
Verdict: NEEDS BENCH
Facts this rests on:
Cross-component rules
Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.
No cross-component rule names this record.
Sources
Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.
ASPI-0630LR molded power inductor
Source ID: src-aspi-0630lr-100m-t15-datasheet · Authority: MANUFACTURER_PRIMARY
| Field | Recorded value |
|---|---|
| Document number | Rev C |
| Revision | Rev C |
| Document date | 2022-11-08 |
| Retrieved | 2026-09-20 |
| Printed page | see locator |
Locator: Pages 1 and 7: ASPI-0630LR-100 row, current definitions and land pattern
Availability: AVAILABLE
Document URL: https:
LCSC C1334133 exact orderable
Source ID: src-aspi-0630lr-100m-t15-catalog · Authority: DISTRIBUTOR_IDENTITY
| Field | Recorded value |
|---|---|
| Document number | C1334133 |
| Revision | C1334133 |
| Document date | 2026-09-20 |
| Retrieved | 2026-09-20 |
| Printed page | see locator |
Locator: Exact MPN and LCSC product identity table
Availability: AVAILABLE
Document URL: https:
Board B synchronous pre-regulator specification
Source ID: src-aspi-0630lr-100m-t15-project · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | board_b_spec.py |
| Revision | board_b_spec.py |
| Document date | 2026-09-20 |
| Retrieved | 2026-09-20 |
| Printed page | see locator |
Locator: COMPONENTS and NETS rows for the U2 positive pre-regulator
Availability: AVAILABLE
Document URL: no link is published for this source
Abracon ASPI-0630LR manufacturer STEP retrieval attempt
Source ID: src-aspi-0630lr-100m-t15-manufacturer-step-attempt · Authority: MANUFACTURER_PRIMARY
| Field | Recorded value |
|---|---|
| Document number | ASPI-0630LR.STEP.zip |
| Revision | Public family STEP link |
| Document date | 2026-09-20 |
| Retrieved | 2026-09-20 |
| Printed page | not applicable |
Locator: Manufacturer product-page document links section, STEP row; https:
Availability: SOURCE UNAVAILABLE
Document URL: https:
ASPI-0630LR maximum-envelope visualization generator
Source ID: src-aspi-0630lr-100m-t15-model-generator · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | generate-aspi-envelope.py |
| Revision | Maximum-envelope box v1 |
| Document date | 2026-09-20 |
| Retrieved | 2026-09-20 |
| Printed page | not applicable |
Locator: Generation section: SIZE_MM and box construction; STEP readback assertion and WRL coordinates
Availability: AVAILABLE
Document URL: no link is published for this source
Legend
What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.
Verdict
| Recorded term | What it means |
|---|---|
CONFIRMED - distributor identity only | A distributor listing confirms which part this is, and nothing more. It carries no electrical, thermal or lifetime authority. |
NEEDS BENCH | Cannot be settled from documents. It needs measurement on real hardware before it can be relied on. |
NOT APPLICABLE | The parameter does not apply to this part as it is used here. |
PASS - primary-source confirmed | Confirmed against the manufacturer's own document for this exact part. |
UNSOURCED | No accepted source backs this value yet. Treat it as a claim, not a fact. |
Provenance
| Recorded term | What it means |
|---|---|
DISTRIBUTOR-IDENTITY | Taken from a distributor listing. Identity information only. |
PRIMARY-SPEC | Taken from the manufacturer's own specification document. |
PROJECT-CHOICE | A decision made by this project. No vendor asserts it. |
UNVERIFIED | Recorded, but not yet backed by an accepted source. |
Fact class
| Recorded term | What it means |
|---|---|
GUARANTEED_ELECTRICAL | A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values. |
PROJECT_STATE | A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification. |
THERMAL_SOA | Thermal and safe-operating-area behaviour: how much the part may dissipate, and under what mounting and ambient conditions. |
TYPICAL_CURVE | A representative figure read from a characteristic curve. Typical values are not guaranteed and vary part to part. |
Coverage status
| Recorded term | What it means |
|---|---|
COVERED | Every question this domain asks is answered by the facts listed against it. |
OPEN | Unresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing. |
Source availability
| Recorded term | What it means |
|---|---|
AVAILABLE | The document was retrieved and is on record. |
SOURCE UNAVAILABLE | The document could not be retrieved. It stays listed so the gap is visible; anything resting on it remains unsourced. |
Source authority
| Recorded term | What it means |
|---|---|
DISTRIBUTOR_IDENTITY | A distributor listing. Establishes which part this is, nothing more. |
MANUFACTURER_PRIMARY | The manufacturer's own document for this exact part. |
PROJECT_GENERATOR | A document this project generated, such as a schematic or netlist export. |
Identity state
| Recorded term | What it means |
|---|---|
VERIFIED | The exact orderable part has been confirmed against a source. |
Source state
| Recorded term | What it means |
|---|---|
AVAILABLE | At least one document backing this line was retrieved. |
Unit
| Recorded term | What it means |
|---|---|
NONE | The value is not a physical quantity, so it carries no unit. Recorded as `NONE`. |
Raw agent resource
This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.
No owning bundle is identified in the published model.