0603WAF0000T5E

0 Ohm link resistor, CC-line debounce net jumper — UNI-ROYAL — C21189 — board-a R19 (fitted), R20 (fitted); board-p R19 (fitted), R20 (fitted) — rec-c21189

Generated from the component evidence records — edit the records, not this page.

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: 0603WAF0000T5E

Identity

Fit: Fitted

Identity state: VERIFIED

Source state: AVAILABLE

Coverage: 1 open of 2 published

Documents and package

Specification PDF

UNI-ROYAL Thick Film Chip Resistors

Authority

MANUFACTURER_PRIMARY

Availability

AVAILABLE

Footprint preview

Package model

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Specification PDF — UNI-ROYAL Thick Film Chip Resistors

Selected source ID: src-c21189-uniroyal

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: R0603

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

electrical-limits

Coverage ID: cov-c21189-electrical-limits · Status: COVERED

Reason: Jumper resistance (<50 mOhm), rated current (1A), overload current (2A), and operating temperature are all primary-source confirmed from the UNI-ROYAL 0603 jumper ratings row.

Facts in this domain:

• fact-c21189-manufacturer

• fact-c21189-jumper-resistance

• fact-c21189-rated-current

• fact-c21189-overload-current

• fact-c21189-temperature

pulse-energy-at-installed-waveform

Coverage ID: cov-c21189-pulse-energy · Status: OPEN

Reason: Rated/overload current alone does not establish a pulse-energy rating for the installed CCDB bridging waveform.

Facts in this domain:

• fact-c21189-pulse-caveat

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-c21189-pulse-caveat

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

RECOMMENDED_OPERATION

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

TRANSIENT

Behaviour during a short event — startup, a switching edge, a fault or a surge.

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-c21189

• Symbol: 0603WAF0000T5E

• Footprint: R0603

• Pins: 2

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

No interaction is published for this record.

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

No cross-component rule names this record.

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

UNI-ROYAL Thick Film Chip Resistors

Source ID: src-c21189-uniroyal · Authority: MANUFACTURER_PRIMARY

Locator: Section 2, Part No. System, codes 2.1 through 2.5; page 4 Resistance Range table; page 5 Ratings/Derating table; page 6 Temperature Coefficient and Short-time overload tables

Availability: AVAILABLE

Document URL: https://www.uni-royal.cn/en/images/userfile/file/1668661899c56505e6d9ab55c7.pdf

Board A - USB-PD Core (zudo-pd design doc)

Source ID: src-c21189-boardadoc · Authority: PROJECT_GENERATOR

Locator: Net tables section, rows for the cited net names; BOM table rows mapping refdes to LCSC ID

Availability: AVAILABLE

Document URL: https://github.com/Takazudo/zudo-pd/blob/main/doc/src/content/docs/overview/board-a-usb-pd-core.md

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Provenance

Fact class

Coverage status

Source availability

Source authority

Identity state

Source state

Unit

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

No owning bundle is identified in the published model.