PZ254V-11-06P

male board-to-board header — XFCN — C492405 — board-p JOUT1 (fitted) — rec-c492405

Generated from the component evidence records — edit the records, not this page.

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: PZ254V-11-06P

Identity

Fit: Fitted

Identity state: VERIFIED

Source state: AVAILABLE

Coverage: 2 open of 3 published

Documents and package

Mechanical drawing PDF

XFCN PZ254V-11-XX 2.54 mm Pin Header Connectors

Authority

MANUFACTURER_PRIMARY

Availability

AVAILABLE

Footprint preview

Package model

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Mechanical drawing PDF — XFCN PZ254V-11-XX 2.54 mm Pin Header Connectors

Selected source ID: src-c492405-drawing

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: HDR-TH_6P-P2.54-V-M

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

identity, pitch, ratings, dimensions, mating family, and dated stock

Coverage ID: cov-c492405-spec · Status: COVERED

Reason: Exact manufacturer drawing/page plus dated distributor identity and inventory record

Facts in this domain:

• fact-c492405-manufacturer

• fact-c492405-identity

• fact-c492405-pitch

• fact-c492405-current

• fact-c492405-voltage

• fact-c492405-temperature

• fact-c492405-dimensions

• fact-c492405-mating

Board P signal mapping

Coverage ID: cov-c492405-map · Status: OPEN

Reason: The Board P JOUT1 signal binding is recorded in pin-map.json and interactions.json and must be continuity-checked before mating.

Facts in this domain: none are recorded against it.

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

direct board alignment, standoff, retention, and polarity verification

Coverage ID: cov-c492405-mechanical · Status: OPEN

Reason: PCB placement and enclosure retention require layout and bench review beyond the connector drawing.

Facts in this domain:

• fact-c492405-mating

Blocked by: no blocking fact is recorded. What is missing has not been reduced to a specific recorded fact, so the reason above is the whole of what is known.

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

RECOMMENDED_OPERATION

The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-c492405

• Symbol: PZ254V-11-06P

• Footprint: HDR-TH_6P-P2.54-V-M

• Pins: 6

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-xfcn-pair

• Records involved: rec-c492405 (this record), rec-c2832269

• Conditions: Nominal XFCN single-row PZ254 male to PM254 female series pairing at 2.54 mm pitch; does not prove PCB alignment or polarity

• Verdict: PASS - primary-source confirmed

Facts this rests on:

• fact-c492405-pitch

• fact-c492405-mating

• fact-c2832269-pitch on PM254V-11-06-H85

• fact-c2832269-mating on PM254V-11-06-H85

int-xfcn-board-map

• Records involved: rec-c492405 (this record), rec-c2832269

• Conditions: Board P JOUT1 and Board B J5 both use pins 1/2 power, 3 ATT, 4 PDOK, and 5/6 ground; verify physical pin-1-to-pin-1 orientation and continuity before power

• Verdict: NEEDS BENCH

Facts this rests on:

• fact-c492405-identity

• fact-c2832269-identity on PM254V-11-06-H85

int-xfcn-mechanical

• Records involved: rec-c492405 (this record), rec-c2832269

• Conditions: Review PCB-to-PCB spacing and interference, fully seat the unkeyed pair, add appropriate mechanical retention, continuity-test all six nets with power absent, then current-limit first power and check connector temperature under maximum intended load

• Verdict: NEEDS BENCH

Facts this rests on:

• fact-c492405-dimensions

• fact-c492405-current

• fact-c2832269-dimensions on PM254V-11-06-H85

• fact-c2832269-current on PM254V-11-06-H85

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

• rule-rail-envelope — rail-envelope — rule verdict: NEEDS BENCH — Whether every part on the input rail stays inside its own recorded limits across a legal power contract, a mis-contract, and a transient clamp event.

• rule-ab-interface-current — ab-interface-current — rule verdict: NEEDS BENCH

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

XFCN PZ254V-11-XX 2.54 mm Pin Header Connectors

Source ID: src-c492405-drawing · Authority: MANUFACTURER_PRIMARY

Locator: Title/order code; specifications; single-row 06-position dimensions; mating-series statement

Availability: AVAILABLE

Document URL: https://www.xfconn.com/uploads/soft/20240711/4-240G11122102R.pdf

XFCN PZ254V-11-06P product page

Source ID: src-c492405-page · Authority: MANUFACTURER_PRIMARY

Locator: Exact part heading and product-attribute rows

Availability: AVAILABLE

Document URL: https://www.xfconn.com/Product/1737.html

LCSC C492405 product record

Source ID: src-c492405-lcsc · Authority: DISTRIBUTOR_IDENTITY

Locator: Server-rendered product identity row and inventoryLevel/stockNumber fields

Availability: AVAILABLE

Document URL: https://www.lcsc.com/product-detail/C492405.html

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Provenance

Fact class

Coverage status

Source availability

Source authority

Identity state

Source state

Unit

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

No owning bundle is identified in the published model.