zudo-pd
GitHub repository

Type to search...

to open search from anywhere

SMAJ6.5A

400W unidirectional TVS diode, +5V output overvoltage protection (decision a replacement for the SD05) — Brightking — C87267 — board-b TVS2 (fitted) — rec-cand-smaj6-5a-c87267

Generated from the component evidence records — edit the records, not this page.

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: SMAJ6.5A

Identity

FieldRecorded value
Record IDrec-cand-smaj6-5a-c87267
Record kindstandalone
Manufacturer part numberSMAJ6.5A
ManufacturerBrightking
Function400W unidirectional TVS diode, +5V output overvoltage protection (decision a replacement for the SD05)
LCSC IDC87267
PackageD-FLAT_L4.3-W2.6-LS5.3-RD
Inventory lineline-c87267
Also known asSMAJ6.5A/TR13, TVS diode, replacement candidate

Fit: Fitted

Identity state: VERIFIED

Source state: AVAILABLE

Coverage: 0 open of 3 published

Documents and package

Footprint preview

Footprint preview for D-FLAT_L4.3-W2.6-LS5.3-RD
Shared footprint package: D-FLAT_L4.3-W2.6-LS5.3-RD. Open SVG

Package model

Shared footprint package: D-FLAT_L4.3-W2.6-LS5.3-RD. Open model file

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Datasheet PDF — Brightking SMAJ Series transient voltage suppressors (TVS) data sheet

Selected source ID: src-cand-smaj6-5a-brightking-primary

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: D-FLAT_L4.3-W2.6-LS5.3-RD

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

BoardReference designator
board-bTVS2

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

electrical-limits

Coverage ID: cov-cand-smaj6-5a-electrical-limits · Status: COVERED

Reason: Standoff (6.5 V), breakdown (7.22-7.98 V at 10 mA), clamp (11.2 V at 35.7 A, 10/1000 us), peak pulse power (400 W minimum), leakage (500 uA), and the +5 V rail margin math (1.5 V / 30% at nominal) are recorded from the exact SMAJ6.5A row of the Brightking SMAJ-series datasheet.

Facts in this domain:

package

Coverage ID: cov-cand-smaj6-5a-package · Status: COVERED

Reason: JEDEC DO-214AC (SMA) case is primary-source confirmed; same SMA/D-FLAT footprint family already used by TVS1/TVS3 and D5.

Facts in this domain:

availability

Coverage ID: cov-cand-smaj6-5a-availability · Status: COVERED

Reason: Exact orderable C87267 identity (SMAJ6.5A/TR13) and the dated LCSC stock observation (8,450 units at 2026-08-14) are recorded from the distributor product page.

Facts in this domain:

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

Fact: fact-cand-smaj6-5a-leakage

Value: 500 · Unit: uA

Conditions: maximum reverse leakage IR at VRWM 6.5 V, TA=25 C

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 2 electrical characteristics table, SMAJ6.5A row, IR column

TRANSIENT

Behaviour during a short event — startup, a switching edge, a fault or a surge.

Fact: fact-cand-smaj6-5a-pppm

Value: 400 · Unit: W

Conditions: minimum peak pulse power on the 10/1000 us waveform, duty cycle 0.01%, TA=25 C

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 1 features and maximum ratings table, PPPM row

PROTECTION_STANDOFF

The voltage a protection device is expected to sit at without conducting.

Fact: fact-cand-smaj6-5a-standoff

Value: 6.5 · Unit: V

Conditions: maximum reverse standoff voltage VRWM, exact SMAJ6.5A row, TA=25 C; satisfies the deterministic replacement criterion VRWM >= 6.0 V

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 2 electrical characteristics table, SMAJ6.5A row, VRWM column

PROTECTION_BREAKDOWN

The voltage at which a protection device begins to conduct.

Fact: fact-cand-smaj6-5a-breakdown

Value: 7.22 to 7.98 · Unit: V

Conditions: breakdown voltage VBR minimum/maximum at IT 10 mA, TA=25 C

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 2 electrical characteristics table, SMAJ6.5A row, VBR and IT columns

PROTECTION_CLAMP

The voltage a protection device clamps to while conducting its rated surge current.

Fact: fact-cand-smaj6-5a-clamp

Value: 11.2 · Unit: V

Conditions: maximum clamping voltage VC at IPP 35.7 A on the 10/1000 us waveform, TA=25 C

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 2 electrical characteristics table, SMAJ6.5A row, VC and IPP columns

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Fact: fact-cand-smaj6-5a-manufacturer

Value: Brightking · Unit: NONE

Conditions: exact orderable identity; datasheet title block carries www.brightking.com

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 1 title block (SMAJ SERIES, www.brightking.com, Revision 17-Feb-16)

Fact: fact-cand-smaj6-5a-identity

Value: lcsc=C87267; manufacturer=Brightking; mpn=SMAJ6.5A; variant=unidirectional SMA (DO-214AC); LCSC orderable model SMAJ6.5A/TR13 (TR13 = 13-inch tape/reel packing code); LCSC listing stock 8450 units at 2026-08-14 retrieval · Unit: NONE

Conditions: stable distributor identity binding of the exact orderable; same-name cross-vendor substitution prohibited; supplies no electrical or thermal authority. Replacement-candidate identity for the TVS2 slot; the LCSC orderable model is SMAJ6.5A/TR13 where TR13 is the tape/reel packing suffix on the datasheet part SMAJ6.5A.

Verdict: CONFIRMED - distributor identity only · Provenance: DISTRIBUTOR-IDENTITY

Evidence: src-cand-smaj6-5a-lcsc-identity: product page title row and stock row, retrieved 2026-08-14

Fact: fact-cand-smaj6-5a-package

Value: JEDEC DO-214AC (SMA) · Unit: NONE

Conditions: two-pad SMD case; hand-reworkable and JLCPCB-assemblable; same SMA/D-FLAT footprint family the project already uses for TVS1/TVS3 and D5

Verdict: PASS - primary-source confirmed · Provenance: PRIMARY-SPEC

Evidence: src-cand-smaj6-5a-brightking-primary: page 1 mechanical data, case row 'Case: JEDEC DO-214AC'

Fact: fact-cand-smaj6-5a-plus5-margin

Value: 1.5 · Unit: V

Conditions: standoff margin over the nominal +5 V rail if fitted in the TVS2 slot: VRWM 6.5 V minus 5 V nominal = 1.5 V (30% of nominal); selection is deferred to the decision task

Verdict: PASS - primary-source confirmed · Provenance: CALCULATED

Evidence: src-cand-smaj6-5a-brightking-primary — Calculated from fact-cand-smaj6-5a-standoff and the project +5 V output rail definition (TVS2 replacement slot)

Fact: fact-cand-smaj6-5a-stock

Value: 8450 · Unit: pcs

Conditions: LCSC listed stock at the 2026-08-14 retrieval; volatile distributor state recorded as a dated observation, not a spec claim

Verdict: NOT APPLICABLE · Provenance: UNVERIFIED

Evidence: src-cand-smaj6-5a-lcsc-identity: product page stock row, retrieved 2026-08-14

Calculation dependencies

These values were derived from other recorded facts rather than read from a document. The expression and every input are published so the number can be recomputed instead of trusted. A derived value is never stronger than the weakest fact it depends on.

Fact: fact-cand-smaj6-5a-plus5-margin

Expression: fact_cand_smaj6_5a_standoff - 5

Depends on:

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-cand-smaj6-5a-c87267

  • Symbol: SMAJ6.5A_C87267

  • Footprint: D-FLAT_L4.3-W2.6-LS5.3-RD

  • Pins: 2

Pin assignments
Symbol pinNameFootprint padFunction
1C1cathode (band end)
2A2anode

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

No interaction is published for this record.

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

All cross-component rules

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

Brightking SMAJ Series transient voltage suppressors (TVS) data sheet

Source ID: src-cand-smaj6-5a-brightking-primary · Authority: MANUFACTURER_PRIMARY

FieldRecorded value
Document numberSMAJ Series
Revision17-Feb-16
Document date2016-02-17
Retrieved2026-08-14
Printed page2

Locator: Page 1 features/maximum ratings (400 W minimum at 10/1000 us waveform, 'Case: JEDEC DO-214AC') and page 2 electrical characteristics table, exact SMAJ6.5A row

Availability: AVAILABLE

Document URL: https://datasheet.lcsc.com/datasheet/pdf/19d0bf098ced4b4fbeb7d738e7c6c181.pdf

LCSC product page C87267 — SMAJ6.5A/TR13 | TVS Diodes | Brightking | LCSC

Source ID: src-cand-smaj6-5a-lcsc-identity · Authority: DISTRIBUTOR_IDENTITY

FieldRecorded value
Document numberC87267
Revisionvolatile web page (as retrieved)
Document date2026-08-14
Retrieved2026-08-14
Printed page1

Locator: Product page title row 'SMAJ6.5A/TR13 | TVS Diodes | Brightking | LCSC' and the stock row (8,450 in stock), retrieved 2026-08-14

Availability: AVAILABLE

Document URL: https://www.lcsc.com/product-detail/C87267.html

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Recorded termWhat it means
CONFIRMED - distributor identity onlyA distributor listing confirms which part this is, and nothing more. It carries no electrical, thermal or lifetime authority.
NOT APPLICABLEThe parameter does not apply to this part as it is used here.
PASS - primary-source confirmedConfirmed against the manufacturer's own document for this exact part.

Provenance

Recorded termWhat it means
CALCULATEDDerived arithmetically from other facts listed here. The expression and every input are shown, so the number can be recomputed rather than trusted.
DISTRIBUTOR-IDENTITYTaken from a distributor listing. Identity information only.
PRIMARY-SPECTaken from the manufacturer's own specification document.
UNVERIFIEDRecorded, but not yet backed by an accepted source.

Fact class

Recorded termWhat it means
GUARANTEED_ELECTRICALA parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
PROJECT_STATEA value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
PROTECTION_BREAKDOWNThe voltage at which a protection device begins to conduct.
PROTECTION_CLAMPThe voltage a protection device clamps to while conducting its rated surge current.
PROTECTION_STANDOFFThe voltage a protection device is expected to sit at without conducting.
TRANSIENTBehaviour during a short event — startup, a switching edge, a fault or a surge.

Coverage status

Recorded termWhat it means
COVEREDEvery question this domain asks is answered by the facts listed against it.

Source availability

Recorded termWhat it means
AVAILABLEThe document was retrieved and is on record.

Source authority

Recorded termWhat it means
DISTRIBUTOR_IDENTITYA distributor listing. Establishes which part this is, nothing more.
MANUFACTURER_PRIMARYThe manufacturer's own document for this exact part.

Identity state

Recorded termWhat it means
VERIFIEDThe exact orderable part has been confirmed against a source.

Source state

Recorded termWhat it means
AVAILABLEAt least one document backing this line was retrieved.

Unit

Recorded termWhat it means
NONEThe value is not a physical quantity, so it carries no unit. Recorded as `NONE`.

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

No owning bundle is identified in the published model.