PESD24VS1UB

Unidirectional ESD/TVS diode, CC-line DNP protection provision — Nexperia — C85382 — board-a D6 (DNP or hand-fit), D7 (DNP or hand-fit); board-p D6 (DNP or hand-fit), D7 (DNP or hand-fit) — rec-pesd24vs1ub-c85382

Generated from the component evidence records — edit the records, not this page.

Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.

This record in the catalog: PESD24VS1UB

Identity

Fit: DNP or hand-fit

Identity state: VERIFIED

Source state: AVAILABLE

Coverage: 1 open of 3 published

Documents and package

Datasheet PDF

PESD24VS1UB — ESD protection diode in SOD523 package

Authority

MANUFACTURER_PRIMARY

Availability

AVAILABLE

Footprint preview

Package model

Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Datasheet PDF — PESD24VS1UB — ESD protection diode in SOD523 package

Selected source ID: src-pesd24vs1ub-nexperia-primary

Authority: MANUFACTURER_PRIMARY

Availability: AVAILABLE

Package footprint: SOD-523_L1.2-W0.8-LS1.6-RD

This geometry represents a shared footprint package and may not exactly match the manufacturer part.

Placements

Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.

Coverage

Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.

electrical-limits

Coverage ID: cov-pesd24vs1ub-electrical-limits · Status: COVERED

Reason: Standoff (24 V), breakdown (26.5-27.5 V at 5 mA), clamp (36 V at 1 A; 70 V at 3 A, 8/20 us), peak pulse power (160 W), ESD withstand (23 kV IEC contact), leakage (50 nA max), and capacitance (50 pF max) are primary-source confirmed from the 2026-08-06 Nexperia product data sheet.

Facts in this domain:

• fact-pesd24vs1ub-standoff

• fact-pesd24vs1ub-breakdown

• fact-pesd24vs1ub-clamp-1a

• fact-pesd24vs1ub-clamp-3a

• fact-pesd24vs1ub-pppm

• fact-pesd24vs1ub-esd

• fact-pesd24vs1ub-leakage

• fact-pesd24vs1ub-capacitance

distributor-identity

Coverage ID: cov-pesd24vs1ub-distributor-identity · Status: COVERED

Reason: Exact orderable C85382 is bound to Nexperia PESD24VS1UB,115 by the dated LCSC product page identity extract.

Facts in this domain:

• fact-pesd24vs1ub-identity

cc-line-fitting-decision

Coverage ID: cov-pesd24vs1ub-cc-line-fitting-decision · Status: OPEN

Reason: D6/D7 are DNP layout-phase provisions; whether to fit CC-line ESD protection (and whether the 24 V standoff / 36 V at 1 A clamp profile is the right choice against the CC pins it would protect) is deferred to the decision and bench waves; fact-pesd24vs1ub-dnp-provision records the open state.

Facts in this domain:

• fact-pesd24vs1ub-dnp-provision

Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.

• fact-pesd24vs1ub-dnp-provision

Facts

Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.

GUARANTEED_ELECTRICAL

A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.

TRANSIENT

Behaviour during a short event — startup, a switching edge, a fault or a surge.

PROTECTION_STANDOFF

The voltage a protection device is expected to sit at without conducting.

PROTECTION_BREAKDOWN

The voltage at which a protection device begins to conduct.

PROTECTION_CLAMP

The voltage a protection device clamps to while conducting its rated surge current.

PROJECT_STATE

A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.

Pin maps

The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.

pinmap-pesd24vs1ub-c85382

• Symbol: PESD24VS1UB_C85382

• Footprint: SOD-523_L1.2-W0.8-LS1.6-RD

• Pins: 2

Interactions

Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.

int-pesd24vs1ub-cc-provision

• Records involved: rec-pesd24vs1ub-c85382 (this record)

• Conditions: board-a D6/D7 CC-line ESD provision: the parts are registered and footprint-provisioned but DNP; the fitting decision, and the protection-effectiveness judgment of the 24 V standoff / 36 V at 1 A clamp against the CC pins, belong to the decision and bench waves

• Verdict: NEEDS BENCH

Facts this rests on:

• fact-pesd24vs1ub-dnp-provision

Cross-component rules

Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.

No cross-component rule names this record.

Sources

Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.

PESD24VS1UB — ESD protection diode in SOD523 package

Source ID: src-pesd24vs1ub-nexperia-primary · Authority: MANUFACTURER_PRIMARY

Locator: Table 1 Quick reference data (printed page 1), Table 2 Pinning information (printed page 2), Table 5 Limiting values (printed page 3), and Table 6 Characteristics rows VRWM/VBR/IRM/Cd/VCL (printed page 4)

Availability: AVAILABLE

Document URL: https://assets.nexperia.com/documents/data-sheet/PESD24VS1UB.pdf

LCSC product page C85382 — PESD24VS1UB,115 | TVS Diodes | Nexperia | LCSC

Source ID: src-pesd24vs1ub-lcsc-identity · Authority: DISTRIBUTOR_IDENTITY

Locator: Product page title row 'PESD24VS1UB,115 | TVS Diodes | Nexperia | LCSC' and the stock row (100,540 in stock), retrieved 2026-08-14

Availability: AVAILABLE

Document URL: https://www.lcsc.com/product-detail/C85382.html

Legend

What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.

Verdict

Provenance

Fact class

Coverage status

Source availability

Source authority

Identity state

Source state

Unit

Raw agent resource

This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.

No owning bundle is identified in the published model.