USB-TYPE-C-009
USB Type-C receptacle, 6-pin SMD, PD sink input — SHOU HAN — C456012 — board-a J1 (fitted) — rec-usb-type-c-009-c456012
Generated from the component evidence records — edit the records, not this page.
Everything below is projected from this project's stored component evidence. Values keep the exact wording, conditions, units and verdicts they were recorded with — nothing here is re-typed, corrected, or combined into an overall judgement about the part.
This record in the catalog: USB-TYPE-C-009
Identity
| Field | Recorded value |
|---|---|
| Record ID | rec-usb-type-c-009-c456012 |
| Record kind | standalone |
| Manufacturer part number | USB-TYPE-C-009 |
| Manufacturer | SHOU HAN |
| Function | USB Type-C receptacle, 6-pin SMD, PD sink input |
| LCSC ID | C456012 |
| Package | TYPE-C-SMD_TYPE-C-6P |
| Inventory line | line-c456012 |
| Also known as | Shenzhen Shouhan Technology, USB-C receptacle, board-a PD sink input receptacle |
Fit: Fitted
Identity state: VERIFIED
Source state: AVAILABLE
Coverage: 5 open of 5 published
Documents and package
Footprint preview
TYPE-C-SMD_TYPE-C-6P. Open SVGPackage model
Interactive inspection requires JavaScript and WebGL. The package identity remains available in this page.
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Specification PDF — SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD TYPE-C 6P specification (approval sheet)
Selected source ID: src-usb-type-c-009-mirror-spec
Authority: MANUFACTURER_MIRROR
Availability: AVAILABLE
Package footprint: TYPE-C-SMD_TYPE-C-6P
This geometry represents a shared footprint package and may not exactly match the manufacturer part.
Placements
Every position this exact line occupies in the as-built design. One line may be placed many times and across more than one board.
| Board | Reference designator |
|---|---|
| board-a | J1 |
Coverage
Coverage is stated one domain at a time and is never rolled up. A domain marked open is a question that has not been answered; it is not a finding that the part is unsuitable. A record with no open domains has not thereby been declared safe.
manufacturer and MPN identity
Coverage ID: cov-usb-type-c-009-identity · Status: OPEN
Reason: The project MPN label USB-TYPE-C-009 is not named by any manufacturer or distributor document (LCSC catalogs C456012 as SHOU HAN TYPE-C 6P), and no manufacturer-primary document was retrievable, so identity stays UNSOURCED at primary level.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
electrical ratings versus the 15 V / 3 A PD sink contract
Coverage ID: cov-usb-type-c-009-ratings · Status: OPEN
Reason: All electrical ratings come from the lower-authority LCSC-hosted mirror spec; the mirror-stated 5 V rating is exceeded by the negotiated 15 V PD contract and 3 A leaves zero current margin, with no manufacturer-primary confirmation.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
mating durability and operating temperature
Coverage ID: cov-usb-type-c-009-durability · Status: OPEN
Reason: Durability and temperature values are mirror-only and UNSOURCED at primary level; the distributor catalog claims a wider -40 to +85 C range that is not promoted.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
CC pin presence and PD negotiation path
Coverage ID: cov-usb-type-c-009-cc-pd · Status: OPEN
Reason: CC1/CC2 pad presence and the J1-to-U1 CC/VBUS topology are project-locked only; physical continuity through the receptacle is a ranked v4 PD-failure root-cause candidate awaiting bench confirmation on the dead v4 boards.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
package/footprint identity and shell topology
Coverage ID: cov-usb-type-c-009-package · Status: OPEN
Reason: The canonical pad set including the four shared-number shell tabs is project-locked; correspondence to the received part's physical contacts and shell needs incoming continuity mapping.
Facts in this domain:
Blocked by: these facts must be resolved before the domain can close. Each is listed in full under Facts.
Facts
Each fact keeps its value, its unit, the conditions it holds under, where it came from and how far it has been confirmed as separate fields, because they are separate claims. A value without its conditions is not the same fact, and a verdict is about the evidence for the value, not about the part.
ABSOLUTE_MAXIMUM
A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it.
Fact: fact-usb-type-c-009-dielectric
Value: 100 · Unit: VAC
Conditions: dielectric strength test row 3.3: AC 100 V, 50-60 Hz, 1 min, 0.5 mA trip current; test stress, not continuous working voltage
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: ELECTRICAL table row 3.3 DIELECTRIC STRENGTH
RECOMMENDED_OPERATION
The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum.
Fact: fact-usb-type-c-009-rating-voltage
Value: 5 · Unit: V
Conditions: RATING row of the mirror approval spec; the LCSC catalog Voltage Rating row echoes 5V; no manufacturer-primary confirmation exists
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: RATING row, 5 V 3 A
Fact: fact-usb-type-c-009-rating-current
Value: 3 · Unit: A
Conditions: RATING row of the mirror approval spec; no manufacturer-primary confirmation exists
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: RATING row, 5 V 3 A
Fact: fact-usb-type-c-009-cycles
Value: 3000 · Unit: cycles
Conditions: LIFE TEST row 4.6: 3000 insertion/withdrawal cycles at 10-25 cycles/min, no-load and rated-load variants, post-test contact resistance at most 0.1 ohm
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: DURABILITY table row 4.6 LIFE TEST
Fact: fact-usb-type-c-009-temperature
Value: -30 to +85 · Unit: C
Conditions: PRACTICAL TEMPERATURE RANGE row; the LCSC catalog row claims a wider -40 to +85 C range, which is not promoted
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: PRACTICAL TEMPERATURE RANGE row
GUARANTEED_ELECTRICAL
A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values.
Fact: fact-usb-type-c-009-insulation
Value: 100 · Unit: Mohm
Conditions: minimum insulation resistance at 100 V DC for 1 min, row 3.2
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: ELECTRICAL table row 3.2 INSULATION RESISTANCE
Fact: fact-usb-type-c-009-contact-resistance
Value: 40 · Unit: mohm
Conditions: maximum contact resistance measured at 100 mA or less, 1000 Hz, row 3.1
Verdict: UNSOURCED · Provenance: UNVERIFIED
Evidence: src-usb-type-c-009-mirror-spec: ELECTRICAL table row 3.1 CONTACT RESISTANCE
PROJECT_STATE
A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification.
Fact: fact-usb-type-c-009-manufacturer
Value: SHOU HAN · Unit: NONE
Conditions: LCSC brand label SHOU HAN corresponds to SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD per the mirror spec title block; no manufacturer-primary document for C456012 was retrievable from sohantech.com on 2026-08-14
Verdict: UNSOURCED · Provenance: UNVERIFIED
Fact: fact-usb-type-c-009-project-mpn-label
Value: USB-TYPE-C-009 is the project KiCad symbol label (easyeda2kicad import) resolved as the inventory MPN for LCSC C456012; every JLCPCB order (v0.1.0 through v0.4.0) placed J1 as C456012 with footprint TYPE-C-SMD_TYPE-C-6P under BOM comment USB-C; no manufacturer or distributor document names USB-TYPE-C-009 for C456012 · Unit: NONE
Conditions: project label only; the same literal MPN USB-TYPE-C-009 is used by DEALON for the unrelated LCSC C2927029 part and must never be cross-sourced
Verdict: UNSOURCED · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-bom-v040: BOM row USB-C,J1,TYPE-C-SMD_TYPE-C-6P,C456012
Fact: fact-usb-type-c-009-distributor-binding
Value: LCSC C456012 catalog identity: brand SHOU HAN, product model TYPE-C 6P, USB 3.1 Type-C female receptacle, 6 contacts, 1 port, SMD right-angle · Unit: NONE
Conditions: distributor catalog page retrieved and hashed 2026-08-14; identity-level evidence only; the record MPN label USB-TYPE-C-009 does not match the distributor product model TYPE-C 6P, so the CONFIRMED distributor-identity lane is closed and this stays UNSOURCED; LCSC-suggested substitute SH-U262-061N-4BVC11 (C22383472) is a different orderable and never an interchangeable identity
Verdict: UNSOURCED · Provenance: UNVERIFIED
Fact: fact-usb-type-c-009-pd-contract-stress
Value: the negotiated USB-PD sink contract applies 15 V at up to 3 A to J1 VBUS; 15 V is three times the mirror-stated 5 V rating and 3 A equals the mirror-stated current rating with zero margin · Unit: NONE
Conditions: project design state, not a measured limit; the AC 100 V / 1 min dielectric test stress in the mirror suggests insulation headroom but is not a working-voltage rating; engineering acceptance at 15 V needs the bench bring-up on the dead v4 boards
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-board-a-baseline: nets table row VBUS_IN (J1.A9 J1.B9)
Fact: fact-usb-type-c-009-pad-set
Value: canonical footprint TYPE-C-SMD_TYPE-C-6P defines six contact pads A5, A9, A12, B5, B9, B12 plus four shell/mounting tabs sharing pad number 7 · Unit: NONE
Conditions: project KiCad asset lock (easyeda2kicad import); physical correspondence of pads to the received part's contacts and shell needs incoming continuity mapping
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-kicad-footprint: pad rows A5 A9 A12 B5 B9 B12 and four pads numbered 7
Fact: fact-usb-type-c-009-cc-pins
Value: symbol USB-TYPE-C-009 names A5=CC1, B5=CC2, A9/B9=VBUS, A12/B12=GND, 7=EH shell; CC1 and CC2 are separate dedicated pads, which is what lets a power-only 6P receptacle support USB-PD sink negotiation without USB data pairs · Unit: NONE
Conditions: symbol pin naming is the project lock; physical CC continuity through the receptacle is a ranked v4 PD-failure root-cause candidate and needs bench continuity on both plug orientations
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-kicad-symbol: symbol USB-TYPE-C-009 pin rows A5 CC1 and B5 CC2
Fact: fact-usb-type-c-009-cc-topology
Value: post-fix board-a CC1 net: J1.A5 U1.2 R17.1 R19.2 D6.1; CC2 net: J1.B5 U1.4 R18.1 R20.2 D7.1 (R17/R18 5.1 kOhm Rd provisions DNP, R19/R20 0-ohm jumpers, D6/D7 ESD provisions DNP) · Unit: NONE
Conditions: STUSB4500 presents its own internal Rd, so external R17/R18 stay DNP; continuity from the J1 CC pads to U1.2/U1.4 is unverified on the dead v4 boards
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-board-a-baseline: nets table rows CC1 and CC2
Fact: fact-usb-type-c-009-vbus-topology
Value: post-fix board-a VBUS_IN net: J1.A9 J1.B9 U1.24 C1.2 C2.2 R14.1 R11.2 Q1.2 J3.4 D5.1; the GND net carries J1.7 (shell) J1.A12 J1.B12 · Unit: NONE
Conditions: both VBUS pads and both GND pads plus the shell must conduct; D5 SMAJ20A 20 V-standoff TVS clamps VBUS_IN; bench continuity pending
Verdict: NEEDS BENCH · Provenance: PROJECT-CHOICE
Evidence: src-usb-type-c-009-board-a-baseline: nets table rows VBUS_IN and GND
Pin maps
The mapping between schematic pins and PCB pads, or physical terminals for an external part, as recorded. A record may carry more than one map when the same part is documented in more than one context.
pinmap-usb-type-c-009
Symbol:
USB-TYPE-C-009Footprint:
TYPE-C-SMD_TYPE-C-6PPins: 7
Pin assignments
| Symbol pin | Name | Footprint pad | Function |
|---|---|---|---|
7 | EH | 7 | shell/earth, four physical mounting tabs share pad number 7, tied to GND |
A5 | CC1 | A5 | configuration channel 1, PD negotiation |
A9 | VBUS | A9 | VBUS_IN, negotiated 15 V PD input |
A12 | GND | A12 | ground return |
B5 | CC2 | B5 | configuration channel 2, PD negotiation |
B9 | VBUS | B9 | VBUS_IN duplicate contact |
B12 | GND | B12 | ground return duplicate contact |
Interactions
Behaviour that is not a property of this part alone. Each interaction names the records it spans, the conditions it holds under, and how far it has been confirmed. An interaction that spans several parts appears on every one of their pages, under the same identifier, because it is equally a fact about each.
int-usb-type-c-009-cc-stusb4500
Records involved:
rec-usb-type-c-009-c456012(this record)Conditions: Post-fix board-a topology routes J1.A5/J1.B5 directly to STUSB4500 U1.2/U1.4 with 0-ohm R19/R20 jumpers into the debounce nets, DNP R17/R18 Rd provisions (STUSB4500 presents its internal Rd) and DNP D6/D7 ESD provisions; PD negotiation requires intact CC continuity through the receptacle — continuity-map both CC pads with no cable and both plug orientations on the dead v4 boards before any board-a order
Verdict: NEEDS BENCH
Facts this rests on:
int-usb-type-c-009-vbus-in
Records involved:
rec-usb-type-c-009-c456012(this record)Conditions: J1.A9/J1.B9 feed VBUS_IN shared with U1 VBUS sense/discharge, C1 10 uF and C2 100 nF decoupling, D5 SMAJ20A 20 V-standoff TVS, R14 470-ohm discharge path, Q1 load-switch input and R11 VBEN divider; the negotiated 15 V / 3 A contract exceeds the mirror-stated 5 V rating and uses the full 3 A rating — verify thermal and contact behavior at 15 V on the bench
Verdict: NEEDS BENCH
Facts this rests on:
Cross-component rules
Rules that span several parts at once and are published in full on the integration page. Each rule's verdict below is that rule's own — it is a statement about the cross-component question, not about this part — and the exact wording of what the rule refuses to conclude is published with the rule itself.
No cross-component rule names this record.
Sources
Every document cited above, with its identification, when it was retrieved, and what kind of authority it carries. Sources that could not be retrieved are listed too, with their unavailability stated, so a gap in the evidence is visible rather than absent.
SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD TYPE-C 6P specification (approval sheet)
Source ID: src-usb-type-c-009-mirror-spec · Authority: MANUFACTURER_MIRROR
| Field | Recorded value |
|---|---|
| Document number | TYPE-C 6P |
| Revision | FOR APPROVAL, drawn/checked/approved 2021-08-02 |
| Document date | 2021-08-02 |
| Retrieved | 2026-08-14 |
| Printed page | unnumbered spec table page |
Locator: RATING row 5 V 3 A; PRACTICAL TEMPERATURE RANGE row; ELECTRICAL table rows 3.1-3.3; DURABILITY table row 4.6 LIFE TEST
Availability: AVAILABLE
Document URL: https:
LCSC product page C456012 (SHOU HAN TYPE-C 6P)
Source ID: src-usb-type-c-009-lcsc-catalog · Authority: DISTRIBUTOR_IDENTITY
| Field | Recorded value |
|---|---|
| Document number | C456012 |
| Revision | live web page |
| Document date | 2026-08-14 |
| Retrieved | 2026-08-14 |
| Printed page | web page |
Locator: Product attribute table rows Number of Contacts 6P, Connector Type Type-C, Voltage Rating 5V, Mounting Type SMD right-angle; productModel row TYPE-C 6P
Availability: AVAILABLE
Document URL: https:
Shenzhen Shouhan Technology (sohantech.com) primary product documentation for TYPE-C 6P / C456012
Source ID: src-usb-type-c-009-primary-attempt · Authority: MANUFACTURER_PRIMARY
| Field | Recorded value |
|---|---|
| Document number | none found |
| Revision | none found |
| Document date | undated |
| Retrieved | 2026-08-14 |
| Printed page | web page |
Locator: USB Type-C category listing section reviewed; no exact TYPE-C 6P model row and no spec PDF
Availability: SOURCE UNAVAILABLE
Document URL: https:
zudo-pd canonical KiCad footprint TYPE-C-SMD_TYPE-C-6P
Source ID: src-usb-type-c-009-kicad-footprint · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | footprints/kicad/zudo-power.pretty/TYPE-C-SMD_TYPE-C-6P.kicad_mod |
| Revision | 38b5a44f3a5b948ad16f4343eefc31cb50ec91ac |
| Document date | 2026-08-14 |
| Retrieved | 2026-08-14 |
| Printed page | source |
Locator: Pad rows A5 A9 A12 B5 B9 B12 and four shell pads numbered 7
Availability: AVAILABLE
zudo-pd KiCad symbol library entry USB-TYPE-C-009
Source ID: src-usb-type-c-009-kicad-symbol · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | symbols/zudo-pd.kicad_sym |
| Revision | 38b5a44f3a5b948ad16f4343eefc31cb50ec91ac |
| Document date | 2026-08-14 |
| Retrieved | 2026-08-14 |
| Printed page | source |
Locator: Symbol USB-TYPE-C-009 pin rows 7 EH, A5 CC1, A9 VBUS, A12 GND, B5 CC2, B9 VBUS, B12 GND
Availability: AVAILABLE
Document URL: https:
board-a post-fix connectivity baseline
Source ID: src-usb-type-c-009-board-a-baseline · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | scripts/schgen/baselines/board-a.json |
| Revision | 38b5a44f3a5b948ad16f4343eefc31cb50ec91ac |
| Document date | 2026-08-14 |
| Retrieved | 2026-08-14 |
| Printed page | source |
Locator: Nets table rows VBUS_IN, CC1, CC2, GND
Availability: AVAILABLE
v0.4.0 JLCPCB order BOM snapshot
Source ID: src-usb-type-c-009-bom-v040 · Authority: PROJECT_GENERATOR
| Field | Recorded value |
|---|---|
| Document number | jlcpcb-order-snapshots/v0_4_0/used-for-order/BOM-zudo-pd.csv |
| Revision | 38b5a44f3a5b948ad16f4343eefc31cb50ec91ac |
| Document date | v0.4.0 order (4th JLCPCB PCBA) |
| Retrieved | 2026-08-14 |
| Printed page | source |
Locator: BOM row USB-C,J1,TYPE-C-SMD_TYPE-C-6P,C456012
Availability: AVAILABLE
Legend
What the recorded terms on this page mean, in ordinary words. The exact terms above are the ones that count; these descriptions explain them and never replace them.
Verdict
| Recorded term | What it means |
|---|---|
NEEDS BENCH | Cannot be settled from documents. It needs measurement on real hardware before it can be relied on. |
UNSOURCED | No accepted source backs this value yet. Treat it as a claim, not a fact. |
Provenance
| Recorded term | What it means |
|---|---|
PROJECT-CHOICE | A decision made by this project. No vendor asserts it. |
UNVERIFIED | Recorded, but not yet backed by an accepted source. |
Fact class
| Recorded term | What it means |
|---|---|
ABSOLUTE_MAXIMUM | A never-exceed limit. Reaching it may damage the part; it is not an operating target and there is no margin implied by it. |
GUARANTEED_ELECTRICAL | A parameter the manufacturer guarantees over the stated conditions, usually with minimum, typical and maximum values. |
PROJECT_STATE | A value this project recorded about how the part is used here — a chosen operating point, a net assignment, or a derived figure. Not a manufacturer specification. |
RECOMMENDED_OPERATION | The range the manufacturer intends the part to be used in. Always narrower than the absolute maximum. |
Coverage status
| Recorded term | What it means |
|---|---|
OPEN | Unresolved. Open means the question has not been answered, not that the part is unsafe — the reason states what is missing. |
Source availability
| Recorded term | What it means |
|---|---|
AVAILABLE | The document was retrieved and is on record. |
SOURCE UNAVAILABLE | The document could not be retrieved. It stays listed so the gap is visible; anything resting on it remains unsourced. |
Source authority
| Recorded term | What it means |
|---|---|
DISTRIBUTOR_IDENTITY | A distributor listing. Establishes which part this is, nothing more. |
MANUFACTURER_MIRROR | A copy of a manufacturer document hosted elsewhere. Usable, but weaker than the manufacturer's own copy. |
MANUFACTURER_PRIMARY | The manufacturer's own document for this exact part. |
PROJECT_GENERATOR | A document this project generated, such as a schematic or netlist export. |
Identity state
| Recorded term | What it means |
|---|---|
VERIFIED | The exact orderable part has been confirmed against a source. |
Source state
| Recorded term | What it means |
|---|---|
AVAILABLE | At least one document backing this line was retrieved. |
Unit
| Recorded term | What it means |
|---|---|
NONE | The value is not a physical quantity, so it carries no unit. Recorded as `NONE`. |
Raw agent resource
This page is generated from a stored evidence bundle and does not restate it. The bundle is the source of truth: where the two ever disagree, the bundle is right and this page is stale.
No owning bundle is identified in the published model.